JDSU TP607 Guide de l'utilisateur télécharger pdf (Page 8)

one of the four tone sounds provided. The up

and down arrows scroll through the pairs and

pins that have signal on them. All pins not

being driven are held at tester ground.

Setup – The setup mode is provided to set

user-selectable options. The beep-on-pass can

be turned on or off (default is on). The pass

criteria can be set for shielded or unshielded

cables (default is unshielded). The length and

length constant can be set for meters or feet

(default is feet). If the length units are changed,

the tester converts the currently set length

constant to the new units on exit of setup. The

up and down arrow buttons scroll through the

set-able options. The SEL button changes the

current setting to the other option. On exit, the

mode screen first offers to return to the last

mode used before entering setup.

The LanRoamerPRO

™

monitors for voltage

being present on the RJ jack when off, in

TEST/PRE-TEST mode or in LENGTH mode.

The “VOLTAGE!!” message appears on the

screen and the beeper sounds continuously

until the voltage is removed.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Pas de commentaire

JDSU TP607 Guide de l'utilisateur Page 8